System Reference
Legion Pro 32UD-10

// CORE SPECIFICATIONS

PANEL TYPE 31.5" QD-OLED (PureSight)
RESOLUTION 3840 x 2160 (UHD 4K)
REFRESH RATE 240 Hz
RESPONSE 0.03 ms (GtG)
COLOR GAMUT 99% DCI-P3 / 99% sRGB
HDR STANDARD True Black 400 / Dolby VisionĀ®

// CRITICAL I/O DATA

USB-C INPUT DP Alt Mode + 15W PD (Upstream)
HDMI INPUT 2x HDMI 2.1
DP INPUT 1x DisplayPort 1.4
AUDIO OUT NONE (NO 3.5mm JACK)
USB UPSTREAM 1x (USB-C Only)
! KVM WARNING Single upstream USB path via USB-C. Peripheral hub only connects to the device plugged into the USB-C port.

// OPERATIONAL MODES

MODE: PHOTO

OBJECTIVE: COLOR ACCURACY

TARGET MODE: Professional / Color Mode
WEB WORK
Select sRGB Mode. Clamps gamut to prevent oversaturation on social media/web.
MAC / PRINT
Select DCI-P3 Mode. Matches Mac native display and high-end print workflows.
Rec. Brightness: ~120-150 nits (25-40%)

MODE: VIDEO

OBJECTIVE: HDR GRADING / CINEMA

TARGET MODE: DCI-P3 or Cinema

HDR Workflow: Enable "High Dynamic Range" in OS Settings first.

  • > Monitor auto-switches to HDR/Dolby Vision.
  • > Use Gamma 2.2/2.4 for Rec.709.
  • > Use DCI-P3 for 4K Master.

MODE: GAMING

OBJECTIVE: LATENCY & FLUIDITY

TARGET MODE: Game Mode (User/Standard)
ADAPTIVE SYNC ON
OVERDRIVE OFF / LEVEL 1
HDR IN GAMES ON (OS Level)
Do not use "Max" Overdrive. 0.03ms is naturally instant. Max causes overshoot.

// DIAGNOSTIC: SETTINGS GREYED OUT

Unable to access RGB sliders, Brightness, or Contrast? This is a safety lock, not a bug.

DETECTING LOCK REASON... > CHECK: HDR STATUS [!] HDR IS ENABLED --- ACTION REQUIRED: The system takes control of brightness for HDR compliance.
FIX (WINDOWS): Display Settings > Use HDR > OFF FIX (MAC): Settings > Displays > High Dynamic Range > OFF
DETECTING LOCK REASON... > CHECK: COLOR PROFILE [!] sRGB / DCI-P3 MODE ACTIVE --- ACTION REQUIRED: Factory calibration locks RGB to ensure Delta E < 2 accuracy.
FIX: Switch OSD Mode to "Standard", "User", or "Custom".

// AUDIO PATCHING: EDIFIER QR65

The monitor lacks a 3.5mm jack and cannot act as a central audio dock for the PC (HDMI/DP). Select one of the following routing protocols.

PROTOCOL A: INPUT TOGGLE

BEST QUALITY

Uses specific cables for each device. Requires manual switching on speaker.

MAC CONNECTION:
Connect Mac to Speaker via USB-C to USB-A cable.
Speaker Mode: USB (Red/Blue Light)
WINDOWS CONNECTION:
Connect PC (Motherboard Green Jack) to Speaker via 3.5mm AUX cable.
Speaker Mode: AUX (Green Light)

PROTOCOL B: USB SWITCH

BEST CONVENIENCE

Requires external hardware (USB 3.0 Switch / KVM Selector).

HARDWARE CHAIN:
1. Edifier Speaker (USB) -> [USB Switch Input]
2. [Switch Out A] -> Mac
3. [Switch Out B] -> Windows PC
OPERATION:
Press button on USB Switch to toggle speakers between computers instantly.